A / B series cylindro vincula, gravibus officium, recta laminam, duplex picem

Nostra lateque range de torquem includit maxime vulgaris exempla ut roller torquem (una, duplex et triplici) cum recta laminis, in gravibus series, et maxime postulantibus TRADUCOR catenam, leo catenas, et multas aliae quae videri potest in catalogo. Insuper et nos producere catenas cum attachiamentis et ad Lorem drawings et cubits.

Mitte inscriptio nobis Download quod PDF

Product Detail

Product Tags

A series cylinder vincula

Transmissus vincula
Technical parametri

GL Torque No.		Pice	Rollerus dia.	Intra latitudine	Pin Dia.	PLATE	Altitudo interiore transversus laminam picem		Ultima tensie vires	Pondus proxime.
Ansi	ISO	P	D1 (Max)	BL (min)	D2 (Max)	T	h2	Pt	Q	q
		mm	mm	mm	mm	mm	mm	mm	kN	kg / m
* 25-1	04C	6,35	3,30	3,18	2.3	0,8	6		3.5	0.15
* 35-1	06C	9.525	5.08	4.77	3.58	1.30	9	10.13	7.9	0,33
* 35-2 35-3 *									15,8 23.7	0.63 1.05
41-1	LXXXV	12.70	7.77	6,25	3.58	1,25	9.91		6.67	0.41
40-1	08A	12.70	7.92	7.85	3.98	1.50	12.07		13.90	0,66
40-2								14.38	27,80	1.30
40-3									41.70	1.96
50-1	10a	15,875	10,16	9.40	5.09	2.06	15.09		21,80	1.10
50-2 503								18.11	43.60 65.40	2,14 3,20
60-1	12A	19.05	11.91	12.57	5.96	2,44	18.10		31.30	1.53
60-2								22.78	62.60	3.00
60-3									93.90	4.50
80-1	16a	25.40	15.88	15.75	7.94	3.26	24.13		55.60	2.63
80-2 80-3								29.29	111,20 166.80	5,24 7.83
100-1	20A	31.75	19.05	18.90	9.54	4.00	30.17		78.00	4.03
100-2								35.76	174.00	8.02
100-3									261,00	12.00

Transmissus Chains2

GL catenam No.		Pice	Rollerus dia.	Intra latitudine	Pin Dia.	PLATE	Altitudo interiore laminam	Transversus picem	Ultima tensie vires.	Pondus proxime
Ansi	ISO	P	D1 (Max)	B1 (min)	D2 (Max)	T	h2	Pt	Q	q
		mm	mm	mm	mm	mm	mm	mm	kN	kg / m
120-1	24A	38.10	22.23	25.22	11.11	4.80	36.20		125.00	5.94
120-2								45.44	250.00	11.84
120-3									375.00	17.69
140-1	28a	44.45	25.40	25.22	12.71	5.65	42.23		170.00	7.62
140-2								48.87	340.00	15,20
140-3									510.00	22.84
160-1	32A	50.80	28.58	31.55	14.29	6,45	48.26		223.00	10,20
160-2								58.55	446.00	20.25
160-3									669,00	30.31
180-1	36a	57.15	35.71	35.48	17.46	7.25	54.30		281,00	13.96
180-2								65.84	562,00	27.90
180-3									843.00	41.82
200-1	40a	63.50	39.68	37.85	19.85	8.00	60.33		347.00	XVI XC
200-2								71.55	694.00	33.80
200-3									1041,00	50.60
240-1	48a	76.20	47.63	47.35	23.81	9.50	72,39		500.00	22.90
240-2								87.83	1000.00	45.80
240-3									1500.00	68,70

B Series Rollerus vincula

Transmissus Chains3

GL Torque No.	Pice	Rollerus dia.	Intra latitudine	Pin Dia.	PLATE	Altitudo interiore laminam	Transversus picem	Ultima tensie vires	Pondus proxime.
Ansi ISO	P	D1 (Max)	B1 (min)	D2 (Max)	T	h2	Pt	Q	q
	mm	mm	mm	mm	mm	mm	mm	kN	kg / m
03b-I	5	3.2	2.50	1.49		4.1		2.2	0,08
04b-I	6	4	2.8	1.85	0.6	5		3	0.11
05b-I 05b-II	8	5	3	2.31	0,8	7,1	5.64	5	0,19
								7,8	0,33
06b-I	9.525	6,35	5.72	3.28	1.3	8,2		9	0.41
06b-II 06b-III							10,24	16,9	0,77
								24,9	1.16
08b-I	12,7	8.51	7.75	4.45	1.6	11.81		17.80	0,74
08b-II 08b-III							13.92	31.10	1.47
								44.50	2.20
10B-I	15,875	10,16	9.65	5.08	1.7	14.73		22.20	0,95
10b-II 10B-III							16.59	44.50	1.88
								66.70	2.81
12b-I	19.05	12.07	11.68	5.72	1.85	16,13		28.90	1,25
12b-II							19.46	57.80	2,45
12B-III								86.70	3.65
16B-I	25.40	15.88	17.02	8,28	4.09 / 3.10	21.08		60.00	2.90
16B, II							31.88	106.00	5.85
16B-III								160.00	8,75
20b-I	31.75	19.05	19.56	10.19	4.60 / 3.60	26.42		95.00	4.16
20b-II 20b-III							36.45	170.00	8,25
								250.00	12.00

Transmissus chains4

GL catenam No.	Pice	Rollerus dia.	Intra latitudine	Pin Dia.	PLATE	Altitudo interiore laminam	Transversus picem	Ultima tensie vires	Pondus proxime.
Ansi ISO	P	D1 (Max)	B1 (min)	D2 (Max)	T	h2	Pt	Q	q
	mm	mm	mm	mm	mm	mm	mm	kN	kg / m
24B-I	38.10	25.40	25.40	14.63	5,80 / 4.80	33.40		160.00	7.41
24B-II							48.36	280.00	14.75
24B-III								425.00	22.10
28b-I	44.45	27.94	30.99	15.90	7.50 / 6.50	37.08		200.00	9,36
28b-II							59.56	360.00	18.52
28b-III								530.00	27,70
32b-I	50.80	29.21	30.99	17.81	7.00 / 6.00	42.29		250.00	9.94
32b-II							58.55	450,00	19.60
32b-III								670.00	29.26
40b-I	63.50	39.37	38.10	22.89	8.50 / 7.50	52.96		355.00	17.17
40b-II							72,29	630.00	34.10
40b-III								950.00	51.20
48B, I	76.20	48.26	45.72	29.24	11.70 / 10.00	63.88		560.00	25.34
48B-II							91.21	1000.00	50.35
48B-III								1500.00	75.50
56b-I	88.90	53.98	53.34	34.32	1.35 / XII	77.85		850.00	38.02
56b-II							106.60	1600.00	76.00
64b-I	101,60	63.50	60.96	39.40	15/13	90,17		1120.00	48.80
64b-II							119.89	2000.00	96.60
72b-I	114,30	72,39	68.58	44.48	17/15	103,63		1400.00	63.50
72b-II							136,27	2500.00	126,50

Short Picem Officium Sydle vincula
Transmissus Chains5

GL catenam No.		Pice	Rollerus dia.	Intra latitudine	Pin Dia.	PLATE	Altitudo interiore laminam	Transversus picem	Ultima tensie vires	Pondus proxime.
Ansi	ISO	P	D1 (Max)	B1 (min)	D2 (Max)	T	h2	Pt	Q	q
		mm	mm	mm	mm	mm	mm	mm	kN	kg / m
50H-I	10ah	15,875	10,16	9.40	5.09	2,44	15.09		21,80	1.30
50H-II								19.60	43.60	2.58
50H-III									65.40	3.85
60h-I	12th	19.05	11.91	12.57	5.96	3.26	18.10		31.30	1.87
60h-II								26.11	62.60	3.71
60h-III									93.90	5.54
80H-I	16ah	25.40	15.88	15.75	7.94	4.00	24.13		55.60	3.10
80h-II								32.59	111,20	6.10
80h-III									166.80	9.10
100H-I	20ah	31.75	19.05	18.90	9.54	4.80	30.17		87.00	4.64
100H-II								39.09	174.00	9.14
100H-III									261,00	13.64
120h-I	24ah	38.10	22.23	25.22	11.11	5.65	36.20		125.00	6,50
120h-II								48.87	250.00	12.80
120h-III									375.00	19,10
140h-I	28ah	44.45	25.40	25.22	12.71	6.40	42.23		170.00	8,30
140h-II								52.20	340.00	16.30
140h-III									510.00	24.30
160h-I	32th	50.80	28.58	31.55	14.29	7.20	48.26		223.00	11.07
160h-II								61.90	446.00	21.97
160h-III									669,00	32.87
180h-I	36ah	57.15	35.71	35.48	17.46	8.00	54.30		281,00	14.90
180h-II								69.16	562,00	29.56
180h-III									843.00	44.22
200H-I	40ah	63.50	39.68	37.85	19.85	9.50	60.33		347.00	20.00
200H-II								78,31	694.00	39.50
200H-III									1041,00	59.00
240h-I	48ah	76.20	47.63	47.35	23.81	13.00	72,39		500.00	30.00
240h-II								101.22	1000.00	59.50
240h-III									1500.00	89.00

Short picem Rollerus vincula (a series)

Transmissus Chains6

GL Torque No.		Pice	Rollerus dia.	Intra latitudine	Pin Dia.	PLATE	Plate profundum	Transversus picem	Pin longitudinem	Ultima tensie vires	Pondus proxime.
Ansi	ISO	P	D1 (Max)	B1 (min)	D2 (Max)	T	h2	Pt	L	Q	q
		mm	mm	mm	mm	mm	mm	mm	mm	kN	kg / m
C40-1	C08a	12.70	7.92	7.85	3.98	1.50	12.07		17.80	13.90	0,75
C40-2								14.38	32.30	27,80	1.47
C40-3									48.70	41.70	2,19
C50-1	C10a	15,875	10,16	9.40	5.09	2.05	15.09		21,80	21,80	1.24
C50-2								18.11	39.90	43.60	2,44
C50-3									57.90	65.40	3.64
C60-1	C12A	19.05	11.91	12.57	5.96	2,42	18.10		26.80	31.30	1.76
C60-2								22.78	49.60	62.60	3.53
C60-3									72,40	93.90	5,28
C80-1	C16a	25.40	15.88	15.75	7.94	3.23	24.13		33.50	55.60	2.97
C80-2								29.29	62.70	111,20	5.90
C80-3									91.90	166.80	8,85
C100-1	C20a	31.75	19.05	18.90	9.54	4.00	30.17		41.10	87.00	4.58
C100-2								35.76	77.00	174.00	9.13
C100-3									113.00	261,00	13.68
C120-1	C24a	38.10	22.23	25.22	11.11	4.80	36.20		50.50	125.00	6,80
C120-2								45.44	96.30	250.00	13.55
C120-3									141.70	375.00	20.30
C140-1	C28a	44.45	25.40	25.22	12.71	5,60	42.23		54.90	170.00	8,50
C140-2								48.87	103.60	340.00	16.95
C140-3									152,40	510.00	25.40
C160-1	C32a	50.80	28.58	31.55	14.29	6.40	48.26		65.50	223.00	11.60
C160-2								58.55	124,20	446.00	23,10
C160-3									182,90	669,00	34.60
C180-1	C36a	57.15	35.71	35.48	17.46	7.20	54.30		74.28	281,00	15,20
C180-2								65.84	140,12	562,00	29.70
C180-3									205.96	843.00	45.30
C200-1	C40a	63.50	39.68	37.85	19.85	8.00	60.33		80.20	374.00	18.60
C200-2								71.55	151,75	694.00	36.50
C200-3									223,30	1041,00	55.60

Short picem Rollerus vincula (B Series)

GL catenam No.	Pice	Rollerus dia.	Intra latitudine	Pin Dia.	PLATE	Plate profundum	Transversus picem	Pin longitudinem	Ultima tensie vires	Pondus proxime.
Ansi ISO	P	D1 (Max)	B1 (min)	D2 (Max)	T	h2	Pt	L	Q	q
	mm	mm	mm	mm	mm	mm	mm	mm	kN	kg / m
C08B-I	12,7	8.51	7.75	4.45	1.60	11.81		17.00	17.80	0,80
C08B-I							13.92	31.00	31.10	1.58
C08B-I								44.90	45.50	2.36
C10B-I	15,875	10,16	9.65	5.08	1.70	14.73		19.60	22.20	1.01
C10b-II							16.59	36.20	44.50	2
C10B-III								52.80	66.70	2,99
C12B-I	19.05	12.07	11.68	5.72	1.85	16,13		22.70	28.90	1.31
C12b-II							19.46	42.20	57.80	2.60
C12b-III								61.70	86.70	3.89
C16b-I	25.40	15.88	17.02	8,28	4.0 / 3.0	21.08		36.10	60	2.97
C16B-II							31.88	68.00	CVI	5.89
C16B-III								99.90	CLX	8.81
C20b-I	31.75	19.05	19.56	10.19	4.5Z3.5	26.42		43,20	95	4.12
C20b-II							36.45	79,70	CLXX	8,16
C20b-III								116,10	CCL	12.20
C24B-I	38.10	25.40	25.40	14.63	6.0 / 4.8	33.40		53.40	CLX	7.52
C24b-II							48.36	101,80	CCLXXX	14.87
C24b-III								150.20	CDXXV	22.22
C28B-I	44.45	27.94	30.99	15.90	7.5 / 6.0	37.05		65.10	CC	9.87
C28B-II							59.56	124,70	CCCLX	19.54
C28B-III								184,30	DXXX	29.21
C32b-I	50.80	29.21	30.99	17.81	7.0 / 6.35	42.29		67.40	CCL	10.53
C32b-II							58.55	126.00	CDL	20.78
C32b-III								184.50	DCLXX	31.03
C40B-I	63.50	39.37	38.10	22.89	8,0 / 8.4	52.96		82.50	CCCLV	17.30
C40B-II							72,29	154,79	DCXXX	34.50
C40B-III								227,08	CML	51.90
C48b-I	76.20	48.26	45.72	29.24	9,9 / 11.8	63.88		99.00	DLX	25.90
C48b-II							91.21	190.21	M	51.20
C48B-III								281,42	MD	76,25

Duplex picem traductionem cylindro vincula

Transmissus Chains7

GL Torque No.		Pice	Rollerus dia.	Intra latitudine	Pin Dia.	PLATE	Altitudo interiore laminam	Ultima tensie vires	Pondus proxime.
Ansi	ISO	P	D1 (Max)	B1 (min)	D2 (Max)	T / T	h2	Q	q
Ansi	ISO	mm	mm	mm	mm	mm	mm	kN	kg / m
A2040	208A	25.40	7.92	VII LXXXV	3.98	1.50	12.07	13.90	0.42
A2050	21oa	31.75	10,16	9.40	5.09	2.06	15.09	21,80	0,70
A2060	212a	38.10	11.91	12.57	5.96	2,44	18.10	31.30	1.00
A2080	216a	50.80	15.88	15.75	7.94	3.26	24.13	55.60	1.76
A2100	220a	63.50	19.05	18.90	9.54	4.00	30.17	87.00	2.55
A2120	224a	76.20	22.23	25.22	11.11	4.80	36.20	125.00	4.06
A2140	228a	88.90	25.40	25.22	12.71	5,60	42.23	170.00	5.12
A2160	232a	101,60	28.58	31.55	14.29	6.40	48.26	223.00	7.02
A2040h	208AH	25.40	7.92	7.85	3.98	2.03	12.07	13.90	0,56
A2050h	210ah	31.75	10,16	9.40	5.09	2,44	15.09	21,80	0,85
A2060h	212ah	38.10	11.91	12.57	5.96	3,25	18.10	31.30	1.44
A2080h	216ah	50.80	15.88	15.75	7.94	4.00	24.13	55.60	2,25
A2100h	220ah	63.50	19.05	18.90	9.54	4.80	30.17	87.00	3,6
A2120h	224ah	76.20	22.23	25.22	11.11	5,60	36.20	125.00	5.12
A2160h	232ah	101,60	28.58	31.55	14.29	7.20	48.26	223.00	7.94
	208b	25.40	8.51	7.75	4.45	1.60	11.81	17.80	0,52
	210b	31.75	10,16	9.65	5.08	1.70	14.73	22.20	0.63
	212b	38.10	12.07	11.68	5.72	1.85	16,13	28.90	0.78
	216b	50.80	15.88	17.02	8,28	4.10 / 3.10	21.08	60.00	1.88
	220b	63.50	19.05	19.56	10.19	4.60 / 3.60	26.42	95.00	2.65
	224b	76.20	25.40	25.4	14.63	5,80 / 4.80	33.40	160.00	4.77
	228b	88.90	27.94	30.99	15.90	7.50 / 6.50	37.08	200.00	6,30
	232b	101,60	29.21	30.99	17.81	7.00 / 6.00	42.29	250.00	6,79

GL tradendo torquem quod iso / BS / ANSI vexillum, optimum receptionem, quod est ex -appreciated pro sua qualis, oeconomic- est in anno maior et maior output.

Ut ipsum vestibulum materials, GL vincula sunt obtulerunt in ferro et immaculatam ferro (nam operantes in mordeant environments, cum cibum, chemical products et pharmaceuticals), in cibahor, chemical products et pharmaceuticals), in Plant (idoneam et galvanized ferro.

Per vestibulum processus, ut applicare maxime stregreent controls in link laminam Venustates, Polishing cum offa Peening, Pre-Vestibulum et duritia probat ut ad curare bonum qualitas.

Previous: Ss HSS (IV) CXXIV & HB78 Bushing vincula pro Luto Collection Machina

Next: Side whilds for grave-officium / cranked-link tradenda vincula

Scribere nuntium hic mitte nobis